Advertisement
Quick Links
Advertisement
Related Manuals for CableTronix CTA-35-1000PR
Summary of Contents for CableTronix CTA-35-1000PR
- Page 1 INSTALLATION MANUAL CTA-35-1000PR Wall Mount Distribution Amplifier...
-
Page 2: Package Contents
The unit is capable of full channel operation from 54MHz to 1000 MHz. The CTA-35-1000PR’s low-noise and low distortion specs allow it to be used in large networks requiring amplifier cascading. Key features include: adjustable slope control, adjustable gain control, input and output test ports, easy access controls, and shielded RFI enclosures. -
Page 3: Unpacking And Handling
INSTALLATION AND OPERATION NOTE TO SYSTEM INSTALLER System installer must adhere to Article 820-40 of the NEC that provides guidelines for proper grounding and specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. 1. -
Page 4: Hardware Connections
For connection to a 120 VAC, 60Hz outlet 4. HARDWARE CONNECTIONS a. Mount the CTA-35-1000PR securely onto a wall or equipment rack using screws or bolts through the mounting tabs. b. Connect a 75ohm coaxial cable with F-connectors from the RF source output to CTA-35-1000PR’s Input port. -
Page 5: Troubleshooting
F-connectors. b. Ensure the F-connector’s center conductor is making solid contact with the CTA-35-1000PR’s Input and Output ports, and the appropriate RF source and RF distribution network connectors. c. When taking measurements it is always best to use an RF spectrum analyzer or quality signal level meter.