Advertisement
This package contains:
One CT-9X1HD Audio/Video Distribution Amplifier
One 9V AC Power Adaptor
One CT-9X1HD Installation Manual
The CT-9X1HD is a component audio/video 9-port HDTV distribution amplifier. The unit is
designed to allow any audio/video source with Y, Cb, CR or Y, Pb, Pr outputs (components) to
distribute audio and video from a single source to nine different locations without any signal loss.
The CT-9X1HD also supports composite video and digital audio. 480i, 720p, 1080i, and 1080p
resolutions are supported making it ideal for high definition signals.
CT-9X1HD
1-In 9-Out Distribution Amplifier Specifications (Typical)
Video
1. Video Impedance
2. Video Bandwidth
3. Video Gain
4. Return Loss
5. Port to Port Isolation
6. Out to In Isolation
7. Nominal Input Level
Audio (Analog)
8. Audio Input Impedance
9. Audio Output Impedance
10. Gain
11. THD
12. Frequency Response
13. Channel Separation
14. Port to Port Isolation
15. Out to In Isolation
16. Signal to Noise
17. Nominal Input Level
18. Digital Audio
General
19. Power
20. Dimensions
PRODUCT DESCRIPTION
SPECIFICATIONS
75 ohm
>100MHz (HDTV requires 37MHz minimum)
2V unterminated, 1V into 75 ohms
18dB
32dB
60dB
1 Volt peak-to-peak
22K ohm
1K ohm
Unity
0.05%
20Hz to 100kHz
>75dB
60dB
60dB
100dB@2V (out)
1 Volt peak-to-peak
Supports standard SPDIF digital audio. Unity gain when terminated
into 75 ohms (2X gain high impedance). Greater than 50MHz of
bandwidth to ensure minimal degradation.
9V AC @1000mA with a 2.1mm center coaxial connector.
2
Advertisement
