Daikin BRC2E52C7 Operation Manual page 16

Basic Operation Method
Characteristics of Heating Operation
Starting operation
Perform the following operation in order to prevent the degradation of the
heating capability or cold drafts.
Defrost operation
Hot start (VRV
only)
Outdoor
temperature and
heating capability
Operation manual
15
• Heating operation generally requires a longer time to attain the set
temperature compared with cooling operation.
It is recommended to start operating the air conditioner in advance by
using the timer.
• The air conditioner will automatically go into defrost operation to
prevent frost accumulation at the outdoor unit which results in loss of
the heating capacity.
• The indoor unit fan will stop, and "
displayed on the remote controller.
• The air conditioner will return to normal operation after approximately
6 to 8 minutes (Max 10 minutes).
• When the air conditioner goes into heating operation or defrost
operation, the indoor unit fan will stop in order to prevent a cold draft.
(In that case, "
remote controller).
• The heating capacity of the air conditioner will drop when the outdoor
temperature decreases.
If the heating effect is insufficient, it is recommended to use another
heating appliance in combination with the air conditioner. (When a
combustion appliance is used, ventilate the room regularly).
Do not use the heating appliance in places where the heating
appliance is exposed to the airflow of the air conditioner.
• The air conditioner is a hot air circulation type. Therefore, it takes
some time to warm up the room after the air conditioner starts
operating.
The indoor fan will automatically operate until the indoor temperature
of the system rises to a certain level.
• If hot air stays around the ceiling and your feet feel cold, a circulator is
recommended.
For details, consult your Daikin dealer.
" (Defrost/Hot start) will be
" (Defrost/Hot start) will be displayed on the
BRC2E52C7 / BRC3E52C7
4P368042-1 - 2014.02