V205-T DC & V205-T AC/DC
SAFETY PRECAUTIONS
ELECTRIC SHOCK
• Have an electrician install and service this
equipment.
• Turn the input power off at the fuse box,
disconnect or unplug supply lines and
allow machine to sit for five minutes mini-
mum to allow the power capacitors to dis-
charge before working inside this equip-
ment.
• Do not touch electrically hot parts.
------------------------------------------------------------------
INPUT FILTER CAPACITOR DISCHARGE
PROCEDURE
The machine has internal capacitors which are charged to a
high voltage during power-on conditions. This voltage is dan-
gerous and must be discharged before the machine can be
serviced. Discharging is done automatically by the machine
each time the power is switched off. However, you must
allow the machine to sit for at least 5 minutes to allow time
for the process to take place.
------------------------------------------------------------------
ROUTINE MAINTENANCE
Prevent metal powder from accumulating near the aeration fins
and over them.
Carry out the following periodic controls on the power source:
• Clean the power source inside by means of low-pressure com-
pressed air.
• Check the electric connections and all the connection cables.
• Always use gloves in compliance with the safety standards.
WARNING
can kill.
WARNING
D 1
MAINTENANCE