Mitsubishi Apricot MS Series Owner's Handbook Manual page 77

OWNER'S HANDBOOK
Previous boot incomplete - default configuration
used
The
successfully. POST loads default values and
offers to start BIOS Setup. If the failure was
caused by incorrect values and they are not
corrected, the next boot will likely fail too.
Real-time clock error
A service engineer may need to replace your
motherboard.
System battery is dead - replace and run Setup
Replace the configuration battery as instructed
in the Motherboard Features & Upgrades chapter,
then use BIOS Setup to reconfigure the system.
System cache error - cache disabled
The RAM cache failed POST and BIOS
disabled it.
7 / 6 B I O S S e t u p & P O S T
previous POST did
System CMOS checksum bad - run Setup
System CMOS has been corrupted or modified
not complete incorrectly, perhaps by an application program
that changes data stored in CMOS. Run BIOS
Setup and reconfigure the system either by
getting the default values or by making your
own selections.
System timer error
A service engineer may need to replace your
motherboard.