Table of Contents
Advertisement
Connecting to the AC power supply
Important
Any peripheral equipment that requires an AC power cord must be
earthed.
Use the following guidance to connect the components together. It
is important that you take each step in the order indicated.
1.
Before connecting any components, ensure that the AC
power supply is switched off or disconnected, and that the
system unit, the monitor, and any peripherals are turned off.
2.
Connect the components' signal cables to their respective
ports on the system unit: keyboard, mouse, monitor, audio
(where appropriate) and any other peripherals. Where
appropriate, connect the computer to the network.
Standards
Safety
This product complies with the International safety standard
IEC950 and the European safety standard EN60950 which will,
when applicable, include the national deviations for the country in
which it is first sold.
SAFETY & REGULATORY NOTICES
3.
Connect the components' power cords: monitor to system
unit, and system unit and any other peripherals to nearby,
grounded AC power outlets. Then switch on or connect the
AC power supply.
4.
Turn on the system unit first, then the monitor, then other
peripherals.
Power Cable Connections - UK ONLY
This equipment is supplied with an AC power cord that has a non-
removable moulded plug.
Always replace the fuse with one of the same type and rating which
is BSI or ASTA approved to BS1362. Always refit the fuse cover,
never use the plug with the fuse cover omitted.
Electro-magnetic Compatibility (EMC)
This product complies with the following European EMC
standards:
Emissions
EN50022 Class B
Immunity
EN50082-1
This product also complies with the following International EMC
standard:
VCCI Level 1
(Japan)
V
Advertisement
Table of Contents
