Mitsubishi Apricot MS Series Owner's Handbook Manual page 30

Key
1 Video memory upgrade socket
2 DIMM sockets for system memory upgrades
3 Main jumper block
4 Processor socket; Zero Insertion Force (ZIF)
"Socket 7"-type
5 Diskette drive
6 Drive assembly for CD-ROM and HDDs
7 CMOS battery
8 Primary E-IDE interface connector for hard
disk drives
9 Secondary E-IDE interface connector for the
CD-ROM drive
10 1.44 Mbyte diskette drive connector
To remove the system unit cover
1. Shut down the computer and turn off the
monitor.
2. If your AC power outlets have switches, set
them to their off positions.
3. Unplug all power cords from the rear of the
system unit.
4. Unfasten the two casing screws.
5. Slide the top cover rearwards slightly, then lift it
off.
Refitting is the reverse of removal. Take effective anti-
static precautions while the top cover is off, as
explained in the Safety & Regulatory Notices at the
start of this manual.
See the chapter on Motherboard Features & Upgrades
for more information about the motherboard.
OWNER'S HANDBOOK
W e l c o m e 1 / 7