Initial Setup of au Media Tuner
To watch TV (1Seg) using the au Media Tuner, you need to
configure initial settings.
When the standby screen is displayed, hold down
f for at least one second.
Disclaimer notes are displayed.
Use j to check the disclaimer notes, use j
to select OK, and then press c (
The initial setting screen for using the au Media Tuner is
displayed.
•
Follow the on-screen instructions to configure each
setting. Then, the screen for setting TV (1Seg)
channels appears.
Use j to select
(Broadcasting wave)) and then press c (
[Select]).
Automatic channel scanning begins. When receivable
channels are found, the channel setup is completed.
•
Select
manually.
48
[Select]).
(Auto
(Manual) to set the channel
Watching TV (1Seg)
When the standby screen is displayed, hold down
f for at least one second.
To Change Channels
Use s/LR to change channels.
You can select TV (1Seg) and EZ Channel-Plus/EZ Channel
programs.
TV (1Seg)
TV (1Seg)
Change channels one by one.
Change channels one by one.
1ch
1ch
EZ Channel-Plus/EZ Channel
EZ Channel-Plus/EZ Channel
Program 16
Program 16
Program 2
Program 2
•
Before using this feature, you must configure au Media
Tuner initial settings (see the procedure on the left).
•
Channels cannot be changed with
operation screen is displayed.
2ch
2ch
12ch
12ch
Program 1
Program 1
when the data