Adjusting The Incoming Ring Tone Volume; Turning On The Answer Memo - Casio EXILIM CA003 Basic Manual

Adjusting the Incoming Ring
Tone Volume
When the standby screen is displayed, press c.
Use a to select Function and then press
c (Select).
Use j to select Sound/Vib/Lamp and then
press c (Select).
Use j to select Incoming Setup and then press
c (Select).
Use j to select Incoming Call and then press
c (Select).
Use j to select
then press c (Select).
Use j to adjust the volume and then press
c (Set).
Each press of j changes the volume one step.
•
STEP The ring tone volume gradually increases.
STEP The ring tone volume gradually decreases.
Level5
The ring tone sounds at the set volume.
Level1
The ring tone does not sound.
OFF
Press % (OK).
(Ringtone Volume) and

Turning On the Answer Memo

When the standby screen is displayed, hold down
C for at least one second.
is displayed on the standby screen.
Turning Off the Answer Memo
When the standby screen is displayed, hold down C for
at least one second. The answer memo is turned off and
disappears from the standby screen.
• The cell phone can record a maximum of ten
messages, each up to 60 seconds long.
• Answer memo is a function that automatically answers
calls and allows callers to record messages. Use the
Answering Service (Voice Mail) when your phone is
turned off or when you are in a location where a signal
cannot be received.
Playing a Message
If a message is recorded, Answer Memo appears
on the standby screen.
Use s to select Answer Memo and then press
c (Select).
Use j to select the message you want to play
and then press c (Play).
To stop playing the message, press c (Stop).
•
21