Hyper Transport Configuration - Asus M3N78-VM User Manual

PCIE Overclocking [Auto]
Allows selection of PCIE overclocking options to achieve desired PCIE frequency.
Select either one of the preset overclocking configuration options:
[Auto] - allows you to set overclocking parameters automatically.
[Manual] - allows you to individually set overclocking parameters.
The following item appears only when the PCIE Overclocking item is set to
[Manual].
PCIE Frequency [100]
Allows you to enter an integer value from 100MHz to 150 MHz to over clock
for PCIE. Configuration options: [Min.=100] [Max.=150]
CPU Ratio and Voltage:
Processor Frequency Multiplier [Auto]
Allows you to select the processor frequency multiplier.
Configuration options: [Auto] [x4.0 800MHz] [x5.0 1000MHz] [x6.0 1200MHz]
[x7.0 1400MHz] [x8.0 1600MHz] [x9.0 1800MHz]
Processor Voltage [Auto]
Allows you to select the processor voltage. Configuration options: [Auto] [+ 50mv]
[+ 100mv] [+ 150mv]
Processor-NB Voltage [Auto]
Allows you to select the processor-NB voltage. Configuration options: [Auto] [+
50mv] [+ 100mv] [+ 150mv]

Hyper Transport Configuration:

Hyper Transport Speed [Auto]
Allows you to select the Hyper Transport speed. Configuration options: [200 MHz]
[400 MHz] [600 MHz] [800 MHz] [1 GHz] [Auto]
Hyper Transport Width [16 16 ]
Allows you to select the Hyper Transport width. Configuration options: [8 8 ] [16
16 ]
Memory Timing and Voltage:
Memory Clock Mode [Auto]
Allows you to select the Memory Clock mode. Configuration options: [Auto]
[Manual]
2-22 Chapter 2: BIOS setup