Hyper Transport Configuration - Asus M2N-VM DVI Manual

Hyper Transport Configuration

The sub-menu allows you to change the Hyper Transport settings.
Hyper Transport Configuration
SB to K8(CPU) Freq Auto
SB to K8(CPU) Frequency
SB to K8(CPU) LinkWidth
SB.to.K8(CPU).Freq.Auto.[Disabled]
Enables or disables the CPU to automatically adjust Hyper Transport frequency.
Configuration options: [Disabled] [Enabled]
SB.to.K8(CPU).Frequency.[1000.MHz]
Allows you to set the Hyper Transport frequency. This item appears when you set
the MCP55(SB) to K8(CPU) Freq Auto to Disabled.
Configuration options: [200 MHz] [400 MHz] [800 MHz] [1000 MHz].
SB.to.K8(CPU).LinkWidth.[16. .16. ]
Sets the Hyper Transport width.
Configuration options: [4
2-30
[Disabled]
[1000 MHZ]
[16 16 ]
4 ] [8 8 ] [16
SouthBridge to K8(CPU)
frequency selection
by CPU capability
16 ]
Chapter 2: BIOS setup