Vesselview (If Equipped); Sc1000 And Sc100 Digital Gauges (If Equipped); Smartcraft Sc100 System Link Digital Gauges (If Equipped) - Mercury Axius System User Manual

VesselView (If Equipped)

Your power package may be connected to a SmartCraft VesselView display. The interactive VesselView display continuously
reports real‑time information about speed and performance, engine or drive system fault codes, fuel status, water temperature
and depth (when connected through the chart plotter), and other operating data. When VesselView detects a problem with any
connected system, it displays an alarm message to the boat operator.
VesselView may also be connected to other vessel systems such as GPS, generators, and cabin environmental controls. This
vessel integration allows the operator to monitor and control a wide range of vessel systems from a single display.
Refer to the VesselView Operator's Manual for more information.

SC1000 and SC100 Digital Gauges (If Equipped)

The SmartCraft SC1000 and SC100 digital gauges complement VesselView. Refer to the SC1000 and SC100 Digital Gauge
Operator's Manual for more information.
a

SmartCraft SC100 System Link Digital Gauges (If Equipped)

The Cummins MerCruiser Diesel SmartCraft instrument package augments the information provided by VesselView. The
instrument package may display:
• Engine RPM
• Boat speed
• Coolant temperature
• Oil pressure
• Battery voltage
• Fuel consumption
CMD-4082082 / 90-8M0052072
VesselView
b
c c
FEBRUARY 2011
eng
Section 1 - Getting to Know the Axius System
27198
Typical SC1000 gauges
a - Tachometer
b - Speedometer
c - LCD System View display
24575
Page 3