Setting Balance And Fader; Balance Setting; Fader Setting; Switching Loudness On/Off - Becker Traffic Pro 7949 Operation Manual

General operation

Setting balance and fader

You can shift the tone centre in the vehi-
cle using the balance and fader setting.
X Select in the sound
%DODQFH  IDGHU
settings.
1016
An image of the vehicle interior in the
direction of travel appears on the dis-
play. The small triangle indicates the
current position of the tone centre.
The Balance setting is active.
X Turn the rotary control/push button
to select or .
%DODQFH )DGHU
18

Balance setting

X Turn the rotary control/push button
clockwise/counter clockwise.
1016
The tone centre moves to the right/left.

Fader setting

X Turn the rotary control/push button
clockwise/counter clockwise.
1017
The tone centre moves forwards/back-
wards.

Switching loudness on/off

With loudness, the sound is improved by
increasing the bass volumes (especially
suitable for low-volume settings).
X Select in the sound settings.
/RXGQHVV
1018
X Press the rotary control/push button
to switch loudness on ( ) or off ( ).