Becker Grand Prix Installation Manual
Aux installation for radios with cd changer
Hide thumbs
Also See for Grand Prix:
- Specification (2 pages) ,
- Operating instructions manual (61 pages) ,
- Installation instructions (4 pages)
Related Manuals for Becker Grand Prix
Summary of Contents for Becker Grand Prix
- Page 1 Courtesy of:DiscountCarStereo.com AUX Installation Guide for Becker Radios with CD Changer Not for digital systems (e.g. PCM2+, COMAND) Created: August 1, 2015 Revised: April 19, 2019...
- Page 2 Although not critical, we recommend disconnecting the car battery. (C-2 & C-3) from Radio connector (See Fig. 3 ) Keep in mind that most Becker radios are coded and will not operate without the code. Radio code must be available for radio to operate upon reconnection.
- Page 3 Fig. 4 Fig. 6 harness connector Audio Jack 4. Mate Blue ISO plug from Adapter harness to Green plug removed from 6. Drill a ¼” at mounting location on the dash etc., insert aux jack radio in step 2 and this combination should be reconnect to radio (See threated end through the hole and secure with nut (See Fig.7) Fig.
- Page 4 Indianapolis, Cascade pro etc.) that also include an analog CD CHANGERS. The AUX-BKR WILL NOT WORK with Fiber CD Optic CD Changer applications (e.g. PCM2+, COMAND etc.) Plug and play installation to Becker Radio with CD Changer in less than 10 minutes. No wire cutting or splicing. Fig. 8 3.5mm male to male cable...
Need help?
Do you have a question about the Grand Prix and is the answer not in the manual?
Questions and answers