Setting Balance And Fader; Balance Setting; Fader Setting; Switching Loudness On/Off And Adjusting - Becker MEXICO Operation Manual

Setting balance and fader

You can shift the tone centre in the vehi-
cle using the balance and fader setting.
X Select in the sound
settings.
1016
An image of the vehicle interior in the
direction of travel appears on the dis-
play. The small triangle indicates the
current position of the tone centre.
The Balance setting is active.
X Turn the rotary control/push button
to select or .

Balance setting

X Turn the rotary control/push button
clockwise/counter clockwise.
1016
The tone centre moves to the right/left.

Fader setting

X Turn the rotary control/push button
clockwise/counter clockwise.
1017
The tone centre moves forwards/back-
wards.
General operation
Switching Loudness on/off and
adjusting
Loudness provides a tone-compensated
increase of the low frequencies, inde-
pendently of the volume. The setting op-
tions enable you to adapt the Loudness
function to your vehicle.
X Select in the sound settings.
1018
Turn the rotary control/ push button
X
to select the required value.
Note:
Selecting " " sets an increase for higher
bass frequencies, " " for medium bass
frequencies and " " for low bass fre-
quencies. However, an effect is only au-
dible when the built-in speakers are also
suitable for playing back low frequen-
cies.
Select to deactivate the Loudness
function.
19