Route List; Stopover - Becker Traffic Pro 7949 Operation Manual

Navigation mode

Route list

You can display the route planned by the
Traffic Pro.
In the Options menu, select the
X
entry.
OLVW
2070
A list of the roads to the destination
appears. The distance to be travelled
along each road appears after its name.
X Turn the rotary control/push button
to scroll through the list.
Note:
Once route guidance has started, it
takes a little while for the route list to
appear in full.
If the route list is not available due to
recalculation,
1R URXWH OLVW
appears.
44
X Press to exit the route list.

Stopover

You can enter another destination as a
stopover during active navigation.
5RXWH
X In the Options menu, select the
entry.
RYHU
2039
X Turn the rotary control/push button
to select one of the following options:
,
(QWHU DGGUHVV
,
$GG ERRN
or
6SHFLDO'HVW
5DSLG DFFHVV
X Confirm your selection by pressing
the rotary control/push button
DYDLODEOH
•
(QWHU DGGUHVV
You can enter a complete address as a
stopover as described in "Entering a
destination" on page 24.
•
$GG ERRN
You can enter an address book entry as
6WRS
a stopover as described in "Selecting a
destination from the address book" on
page 35.
•
6SHFLDO'HVW
You can enter a POI as a stopover as
described in "Point of interest" on
page 36.
•
5DSLG DFFHVV
You can enter a fast access destination
as a stopover as described in "Naviga-
tion fast access" on page 32.
Once the stopover has been selected, the
.
route is recalculated and route guidance
started to the stopover.