Adjusting The Focus According To Distance; Adjusting The Brightness Of Your Projector - PICO LED Projector User Manual

User's Manual

Adjusting the Focus according to distance

Place the projector on a flat surface and
toward a wall or a projection screen. The
projectional distance and projectional size are:
Distance: 50 cm ~ 425 cm (20 " ~ 167 ")
Image size: 36 cm ~ 305 cm (14 " ~ 120 ")
Adjust the focus by turning the focus ring to get a sharp and clear picture.
Note: Use a tripod (not included) to increase the height of the projectional image
when necessary. The tripod socket is located under the projector.

Adjusting the brightness of your projector

There is a brightness adjustment button on the right side of the projector. It allows you
to change the brightness according to the environment and the power consumption.
1) Enhanced: Select this mode when external power supply is available to
maximize the brightness performance.
2) Standard: The default mode for optimizing the projection performance and
battery capacity.
3) Eco: This mode is recommended when the projector is operated under battery
mode to save power.
Note: The projector is automatically switched to Enhanced mode when It's
powered by the power adapter.
Mode
Enhanced
Normal
Eco
Brightness
Up to 120 lumens
Up to 85 lumens
Up to 60 lumens
Page 8
Battery Life
(HDMI mode)
80 mins
100 mins
120 mins