Displaying The Image On An External Lcd Monitor; Hdmi Output; Charging The External Mobile Devices - PICO LED Projector User Manual

User's Manual
Displaying the image on an External LCD
Monitor
The projector has built-in a HDMI output interface on the rear side. If the environment is
not suitable for projection, you can connect the projector to an LCD monitor or HDTV
with HDMI input port by using a HDMI cable.

HDMI Output

Use the HDMI cable to connect the HDMI output
port on the rear panel of the projector to a LCD
monitor or HDTV. After connected, the screen
switches to LCD monitor automatically.
Charging the External Mobile Device
The internal battery of the projector cannot only be used for projection, but also
charge your mobile device.
1. Connect your mobile device to the projector via the USB
cable with the end of Type A connector plugged into the
USB port on the rear side of projector.
2. The device will be charged automatically when
connected with the projector.
3. Some MHL device does not follow the standard
power design, so that its battery can not be
charged by the projector (e.g. Samsung Galaxy
Nexus, HTC M8)
Note: 1. The projector provides max 5V / 1A output power for charging the mobile
devices.
2. USB cable is not included in the package.
Page 10