PICO Genie M550 Plus 2.0 User Manual

USER MANUAL
Pico Genie M550 Plus 2.0
PACKING LIST
Projector Remote Control
Adapter
Tripod Case
Note: Some accessories are different due to different models.
PRODUCT OVERVIEW
7
6
5
4
3
1
2
1 Electric Focus Button 7 Power button: (1) long press on the power button
> 2 seconds to turn on; (2) short press < 1 second
2
Lens
to turn on the USB 5V output mode when the
3 projector is standby battery mode
Standard model: IR sensor ;
Ultimate model: Auto Focus lens
8
Reset
Note: Can't use the remote control
9 USB 2.0 and 5V out for charging external device
to power on when the projector is
in battery mode.
Air in
10
4 Kickstand
11 Tripod mounting hole
5
Air out
12 Speaker
6 Touch panel
CONTROL PANEL
1 By sliding and clicking on the touch panel, you
can control the cursor and select items.
6
1
2 Menu: Access the video play interface or
HDMI, AV input source.
3 Home: A shortcut for the main interface.
2
4
Return: Back to the last interface or exit the
application.
3 4
5
5 Indicator Light:Red means charging, Purple means charging finished, Blue means working in battery
mode.
6
Scroll bar: If the display content is beyond the page range, use the horizontal and vertical scroll bars
to adjust.
INPUT/OUTPUT
1
1
Power input ( Please use the AC adapter that comes with your projector only)
2
USB input 1
7
SD Card Slot
DEVICE CONNECTION
Connect to Power
AC Cable (EU & UK Plug)
1
External storage device
8
1
Power
9
3 HDMI 1.2 for high-definition signals from
external DVD or laptop devices
4 RJ45 LAN port for network devices, eg. routers
6 Micro SD card slot
Audio Out: for audio output to headphones or audio equipment and S/PDIF digital audio output
7
for connection to digital audio decoding boxes or amplifiers with digital decoding
10 11 12
REMOTE CONTROL ILLUSTRATION
1
2
4
6
8
10
12
15
Keep the remote control close to the projector within 20cm, and press the "Volume +" and "Volume -" to pair, release the
volume button when the indicator light starts to flash slowly . If the indicator flashes quickly 3 times and then turns off, the
pairing is successful. If the indicator flashes quickly for 30 seconds and then goes off, the pairing has failed.Please repeat
above steps.
Battery Notice: Do not use in high temperatures or high humidity. Ensure the
product is charged at least once every 3 months to ensure the best battery
performance.
2 3 4 5 6 7 8
3 4 5 6
HDMI port USB input 2 Ethernet port
8
Headphone & S/PDIF output port
Computer DVD player, Set top box
SD Card
3
4
6
Router
7
2
5
Headphone /
DVD
Active Speaker
2
USB 2.0 & 3.0 for USB devices, such as
U disk, mouse etc.
5
AV in for composite video signal
1 Indicator Light (Remote control pairing, button operation)
3
5 2 3 4 Focus -
Power Mute
7
5 Focus + 6
Cursor
9
7
Device Setting (Includes settings of image quality, volume etc.)
11
8 3D ( Only for 3D videos)
13
9
Aspect Ratio 10 Up Down Left Right
14
11 OK 12 Return
16
13
Menu (Adjust the settings menu when playing local or online
videos)
14 Home 15 Volume - 16 Volume+
Remote Control Instructions :
POWERING ON/OFF
Power on:
1. Ensure the AC adapter is connected to your projector (Please use
the standard AC adapter), the red indicator will turn on.
2.1. Press "
the indicator light turns red. If the charging is completed, the indicator
light turns purple.
2.2. When the projector is in standby, short press the projector "
turn on the USB 5V output mode, the blue indicator light will flash.
Power off :
1. Press " " on the projector or on the remote control to power off the projector.
AV in 1.1 A dialog box will appear by pressing the "
panel or " " and " " on the remote control and then click on the panel or press "
confirm it.
1.2 When you choose Power off and press "
system will be shut down at the same time.
2 Unplug the AC adapter on the projector.
Warning indicator: When the warning indicator (as follows) lights up, the projector will power off
automatically
> "Abnormal temperature", indicator light turns red and flashes slowly indicating that the projector
is overheating. Please check whether the air filter is blocked and clean it with compressed air.
> "Abnormal fan", indicator light turns red and flashes rapidly indicating that the fan is working
abnormally.
HOME SCREEN
Press "Home" button on Touch Panel or Remote Control to enter Home Screen
SETTINGS
Enter Home Screen > Settings to find all the tools for customizing and configuring your
projector.
WIFI, Bluetooth, System, Device, Ethernet Connection, Personalize, Software Update
and About.
"on projector for > 2 seconds to turn it on; If charging,
" to
" on the projector, and choose an option on the projector
" again to
" again, the projector will be turned off, and its cooling