Creating Driver Update Disk (Dud); Creating Dud For Redhat Enterprise Linux; Creating Dud For Suse Enterprise Linux - Chelsio Communications Chelsio T5 Installation And User Manual

Chapter XXI. Unified Boot

7. Creating Driver Update Disk (DUD)

The following section describes the procedure to create Driver Update Disks for RHEL and
SLES distributions for T5 adapters. In case of T4 adapters, you can skip this step and use inbox
drivers to install the operating system.
7.1.

Creating DUD for RedHat Enterprise Linux

If you haven't done already, download ChelsioUwire-x.xx.x.x.tar.gz from Chelsio Download
i.
Center, service.chelsio.com
ii. Untar the package,
[root@host]# tar zxvfm ChelsioUwire-x.xx.x.x.tar.gz
iii. Change your current working directory to LinuxDUD directory,
[root@host]# cd ChelsioUwire-x.xx.x.x/Uboot/LinuxDUD
iv. Insert a blank, formatted USB flash drive.
v. Depending on the distribution to be installed, copy the corresponding image file to the USB
drive. For example, execute the following command for RHEL 6.5:
[root@host]# cp Chelsio-DriverUpdateDisk-RHEL6.5-x86_64-x.x.x.x-y.img <path
to USB drive>
7.2.

Creating DUD for Suse Enterprise Linux

If you haven't done already, download ChelsioUwire-x.xx.x.x.tar.gz from Chelsio Download
i.
Center, service.chelsio.com
ii. Untar the package,
[root@host]# tar zxvfm ChelsioUwire-x.xx.x.x.tar.gz
iii. Insert a blank USB flash drive.
Chelsio T5/T4 Unified Wire For Linux
Page 431