Uninstalling Chelsio Unified Wire From Rpm - Chelsio Communications Chelsio T5 Installation And User Manual

Chapter I. Chelsio Unified Wire

To uninstall WD-TOE and WD-UPD drivers together:
[root@host]# make wdtoe_wdudp_uninstall

To uninstall FCoE Target driver:
[root@host]# make fcoe_pdu_offload_target_uninstall

To uninstall Unified Wire Manager (UM):
[root@host]# make uninstall UM_UNINST=1
OR
[root@host]# make tools_uninstall UM_UNINST=1
4.2.

Uninstalling Chelsio Unified Wire from RPM

Change your current working directory to Chelsio Unified Wire package directory and and run
the following command:
[root@host]# ./uninstall.py <inbox/ofed>
inbox : for removing all Chelsio drivers.
ofed : for removing OFED and Chelsio drivers.
The uninstallation options may vary depending on Linux distribution. View help
Note
[root@host]# ./uninstall.py –h
by typing
Uninstalling Unified Wire package will not uninstall Unified Wire Manager. Refer
Note
to the Unified Wire Manager (UM) chapter to remove the software manually
(Click here).
Chelsio T5/T4 Unified Wire For Linux
for more information.
Page 39