Pxe Boot Process; Legacy Pxe Boot - Chelsio Communications Chelsio T5 Installation And User Manual

Chapter XXI. Unified Boot

4. PXE boot process

Before proceeding, please ensure that the Chelsio CNA has been flashed with the provided
firmware and option ROM (See
4.1.

Legacy PXE boot

i. After configuring the PXE server, make sure the PXE server works. Then reboot the client
machine.
ii. Press [Alt+C] when the message Chelsio Unified Boot BIOS vX.X.X.XX, Copyright (C)
2003-2014 Chelsio Communications Press <Alt-C> to Configure T4/T5 Card(s). Press <Alt-
S> to skip BIOS appears on the screen to enter the configuration utility.
iii. The configuration utility will appear as below:
iv. Choose the CNA on which you flashed the option ROM image. Hit [Enter].
Chelsio T5/T4 Unified Wire For Linux
Flashing firmware and option ROM).
Page 395