Finishing; Minimum Mantel Clearances; Log Placement - Napoleon GVF40P Installation And Operating Instructions Manual

8.0 FINISHING

8.1

MINIMUM MANTEL CLEARANCES

RISK OF FIRE, MAINTAIN ALL SPECIFIED AIR SPACE CLEARANCES TO COMBUSTIBLES. FAILURE
TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE A FIRE OR CAUSE THE APPLIANCE TO
OVERHEAT. ENSURE ALL CLEARANCES (I.E. BACK, SIDE, TOP, VENT, MANTEL, FRONT, ETC.) ARE
WHEN USING PAINT OR LACQUER TO FINISH THE MANTEL, THE PAINT OR LACQUER MUST BE
Combustible mantel clearance can
vary according to the mantel depth.
Use the graph to help evaluate the
clearance needed. The four-sided top
extension piece may be removed if
non-combustible framing is faced with
a non-combustible material.
Dashed lines are suitable mantel
sizes and clearances when a non-
combustible facing is used.
8.2

LOG PLACEMENT

LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT MODIFY THE
PROPER LOG POSITIONS, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYED
DO NOT PLACE CHARCOAL EMBERS, VERMICULITE OR CHARCOAL LUMPS ON THIS BURNER.
ALL PREVIOUSLY APPLIED LOOSE MATERIAL (GLOWING EMBERS) MUST BE REMOVED PRIOR TO
DO NOT CHANGE OR SUBSTITUTE THE GLOWING EMBER MATERIAL PROVIDED WITH THE
APPLIANCE. IF REPLACING, USE ONLY REPLACEMENT GLOWING EMBERS AVAILABLE FROM
TM
PHAZER logs and charcoal embers, exclusive to Napoleon® fi replaces, provide a unique and realistic
glowing effect that is different in every installation.
CLEARLY MAINTAINED.
HEAT RESISTANT TO PREVENT DISCOLOURATION.
IGNITION MAY OCCUR.
THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.
YOUR LOCAL AUTHORIZED DEALER / DISTRIBUTOR.
WARNING
!
WARNING
!
REAPPLICATION.
21
73.1
76.2A
W415-0810 / A / 05.04.10