List Of Messages For Web Services - Canon VIXIA HFR60 Instruction Manual

Trouble?
Wireless communication is not working correctly
- To avoid interference, use the camcorder at some distance from
devices that emit electromagnetic waves (cordless phones, micro-
wave ovens, etc.).
- Turn off the camcorder and access point. After a short while, turn
them on again and perform the Wi-Fi network setup again. If the
problem persists contact a Canon Service Center.
D List of Messages for Web Services
Check network settings
- The network settings in the camcorder are not correctly config-
ured. Check the connection point, SSID and other network set-
tings.
Connect to a computer and use the dedicated software to set again
- An error occurred when connecting to the CANON iMAGE
GATEWAY server. Check the settings saved on CANON iMAGE
GATEWAY and set them again in the camcorder.
Connect to a computer and use the dedicated software to set up
This service may not be available in your region
- To use Web services, set in the camcorder the settings saved on
CANON iMAGE GATEWAY. Install CameraWindow in your com-
puter and configure the settings using CANON iMAGE GATEWAY.
Insufficient space on server
- You have exceeded the amount of data you can save on the
CANON iMAGE GATEWAY server. Delete some data to free some
space.
Downloaded From VideoCamera-Manual.com Manuals
271