Canon VIXIA HFR60 Instruction Manual page 251

Trouble?
Sound is distorted or is recorded at lower levels.
- When recording near loud sounds (such as fireworks, shows or
concerts), sound may become distorted or it may not be recorded
at the actual levels. This is not a malfunction. Adjust the audio
recording level manually (A 234).
The picture is displayed correctly but there is no sound from the
built-in speaker.
- Speaker volume is turned off. Adjust the volume (A 68).
- If the supplied High Speed HDMI cable or optional STV-250N Ste-
reo Video Cable is connected to the camcorder, disconnect it.
- The AV OUT/× terminal is set to headphone output. Set 1
q >
There is no sound from the AV OUT/× (headphones) terminal.
- D Audio will not be output from the AV OUT/× terminal
while Wi-Fi functions are in use.
Memory Card and Accessories
Cannot insert the memory card.
- The memory card was not facing the correct direction. Turn the
memory card over and insert it.
Cannot record on the memory card.
- The memory card is full. Delete some recordings (A 73) to free
some space or replace the memory card.
- Initialize the memory card using the [Complete Initialization] option
(A 41) when you use it with the camcorder for the first time.
- The LOCK switch on the memory card is set to prevent accidental
erasure. Change the position of the LOCK switch.
Downloaded From VideoCamera-Manual.com Manuals
[AV/Headphones] to [Ò AV].
251
>