Canon VIXIA HFR60 Instruction Manual page 204

Wi-Fi Connection and Settings
■
Wi-Fi Protected Setup (WPS)
If your access point is WPS-compatible (bears the logo shown below),
connecting the camcorder to it can be very easy. If you cannot suc-
cessfully connect the camcorder using WPS, try using the [Search for
Access Points] method. Refer also to the access point's (wireless
router's) instruction manual.
1
[WPS: Button] method
• Press and hold the WPS button on the wireless router.
• Depending on the router, the amount of time required may differ.
• Make sure the router's WPS function is activated.
[WPS: PIN Code] method
• From a computer or similar device connected to the access
point, use the Web browser to open the router's WPS settings
screen. After the 8-digit PIN code appears on the camcorder's
screen, enter it into your router's WPS settings screen.
2
Within 2 minutes, touch [OK] on the camcorder's screen.
• The camcorder will connect to the access point.
• You can touch [Stop] and then [OK] to interrupt the Wi-Fi Pro-
tected Setup while it is in progress.
• When the Wi-Fi Protected Setup is finished, [Configuration com-
pleted] will appear on the screen.
Downloaded From VideoCamera-Manual.com Manuals
204