Canon VIXIA HFR60 Instruction Manual page 249

Trouble?
Cannot mark individual scenes/photos in the index screen with a
checkmark !.
- You cannot select more than 100 scenes/photos individually. Select
the [All Scenes] or [All Photos] option instead of [Select].
Indicators and Onscreen Displays
appears (in red) on the screen.
- Battery pack is exhausted. Replace the battery pack with a fully
charged one.
appears (in red) on the screen.
- The camcorder cannot communicate with the battery pack
attached so the remaining battery charge cannot be displayed.
appears (in red) on the screen.
- A memory card error occurred. Turn off the camcorder. Remove
and reinsert the memory card. Initialize the memory card if the dis-
play does not change back to normal.
(in red) and [End] appear on the screen.
- The memory card is full. Replace the memory card or delete some
recordings (A 73) to free some space on the memory card.
Even after stopping recording, the ACCESS indicator does not go
off.
- The scene is being recorded in the memory. This is not a malfunc-
tion.
The red POWER/CHG indicator flashes rapidly (
flash at 0.5-second intervals).
- The temperature of the battery pack is outside its operating range
(approximately 0 – 40 °C (32 – 104 °F)). Remove the battery pack,
warm it or let it cool down, as necessary, and try charging it again.
Downloaded From VideoCamera-Manual.com Manuals
249
one