Table of Contents
Advertisement
2.- INSTALLATION
2..- PRELIMINARY PREPARATIONS
The unit must be transported in a HORIZONTAL POSITION on its metal mounting frame. Any other position may
cause serious damage to the machine. When the unit is received, it should be checked to assure that it has received
no shocks or other damage, following the instructions on the packaging. If there is damage, the unit may be rejected
by notifying the LENNOX Distribution Department and stating why the machine is unacceptable on the transport
agent's delivery note. Any later complaint or claim made to the LENNOX Distribution Department for this type of
damage cannot be considered under the Guarantee.
Sufficient space must be allowed to facilitate installation of the unit.
When positioning the unit, be sure that the Rating Plate is always visible since this data
will be necessary to ensure correct maintenance.
The units are designed to be installed with ducts designed by qualified technical staff. The joints to be used between
ducts and openings in the unit should be Elastic Joints. Avoid the use of BYPASS joints between the extraction air
and input air. The structure where the unit is placed must be able to support the weight of the unit during operation.
Defrosting:
To avoid ice accumulation in the driptray , it may be necessary to install an electrical heater and
inside the drainage connection , to drain correctly the water
The drainage must be always accessible through the indoor part , in order to remove easily the
dirty than may be accumulated.
2.2.- UNIT ACCEPTANCE
All the units have metal bedplate profiles and wooden blocks for transportation.
These wooden blocks must be removed when positioning the unit in its final position.
PLACEMENT OF
BEDPLATE AND
TRANSPORTATION
BLOCKS
How to hoist the unit
If unloading and placement require the use of a crane,
then secure the suspension cables as shown in the
figure.
All INSTALLATION, SERVICE and MAINTENANCE work
must be carried out by QUALIFIED PERSONNEL.
Wood block
6
Para extraer los tacos de transporte, quite el
tornillo y deslice el taco por el perfil metálico
Bedplate profile
Securing screw
Wood block
Use separators
Advertisement
Table of Contents
