Changing The Scan Feature Settings - Samsung SCX-6545N Series User Manual

CHANGING THE SCAN FEATURE SETTINGS

This part explains how to adjust the document settings for each scan job,
such as resolution, duplex, original size, type, color mode, darkness, and
more. The options you change will be maintained for a certain time, but after
that period, the options will be reset to default values.
Duplex
This feature especially applies when the original documents to be scanned
are two-sided. You can select whether the machine scans only one side of
the paper or both sides of the paper.
Press Scan > Scan to Email (Or Scan to Server) > the Basic tab >
Duplex. Use left/right arrows to toggle the values.
• 1 Sided: For originals that are printed on one side only.
• 2 Sided: For originals that are printed on both sides.
• 2 Sided, Rotate Side 2: For originals that are printed on both sides.
But the back is rotated 180 degrees.
To use 2 Sided and 2 Sided, Rotate Side 2, you have to load the
originals on the DADF. Because, if the machine can not detect the
original on DADF, automatically changes the option to 1 Sided.
Resolution
You can adjust document resolution.
Press Scan > Scan to Email (Or Scan to Server) > the Basic tab >
Resolution. Use left/right arrows to toggle the values. The higher value you
select the clear result you get. But the scanning time may take longer.
100, 200, 300 dpi resolution is available only when Color Mode is set to
Color or Gray. The following table shows detailed information feature,
resolution and file format options.
FEATURE RESOLUTION (DPI)
Scan to Email 100, 200, 300, 400,
600
Scan to PC 100, 200, 300, 400,
600
Scan to Server 100, 200, 300, 400,
600
56 _Scanning
FILE FORMAT
PDF, Single-Page TIFF,
Multi-Page TIFF, JPEG
PDF, TIFF, JPEG
PDF, Single-Page TIFF,
Multi-Page TIFF, JPEG
Original Size
You can specify the scanning area on the originals by selecting the pre-
defined size, or putting in the margin value or Auto. If you set this option to
Auto, the machine senses and determines the size of the original.
Press Scan > Scan to Email (Or Scan to Server) > the Advanced tab >
Original Size. Use up/down arrows to go to the next screen. Select the
appropriate option and press OK.
Original Type
You can set the original document type in order to enhance the quality of a
document being scanned.
Press Scan > Scan to Email (Or Scan to Server) > the Image tab >
Original Type. Select the appropriate option and press OK.
• Text: For originals that have text or line art.
• Text/Photo: For originals that have both text and photographs
together.
• Photo: For originals that are continuous tone photographs.
Color Mode
Use this option to scan the original in Mono, Gray or Color mode.
Press Scan > Scan to Email (Or Scan to Server) > the Image tab > Color
Mode. Select the appropriate option and press OK.
• Color: Uses color to display an image. 24 bits per pixel, 8 bits for
each RGB, is used for 1 pixel.