Installing Software For Network Printing - Samsung SCX-6545N Series User Manual

Installing Software for Network Printing

When you connect your printer to a network, you must first configure the
TCP/IP settings for the printer. After you have assigned and verified the
TCP/IP settings, you are ready to install the software on each computer
on the network.
You can install the printer software using the typical or custom method.
Typical Installation
This is recommended for most users. All components necessary for
printer operations will be installed.
1
Make sure that the printer is connected to your network and
powered on. For details about connecting to the network, see the
supplied printer's User's Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation window
appears.
If the installation window does not appear, click Start and then
Setup.exe
Run. Type X:\ , replacing "X" with the letter which
represents your drive and click OK.
If you use Windows Vista, click Start → All programs →
Accessories → Run, and type X:\
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in
the User Account Control window.
3
Click Next.
• If necessary, select a language from the drop-down list.
Setup.exe
.
8
Installing Printer Software in Windows
4
Select Typical installation for a network printer. Click Next.
5
The list of printers available on the network appears. Select the
printer you want to install from the list and then click Next.
•If you do not see your printer on the list, click Update to refresh
the list, or select Add TCP/IP Port to add your printer to the
network. To add the printer to the network, enter the port name
and the IP address for the printer.
To verify your printer's IP address or the MAC address, print a
Network Configuration page.
•To find a shared network printer (UNC Path), select Shared
Printer [UNC] and enter the shared name manually or find a
shared printer by clicking the Browse button.
N : If you cannot find your machine in network, please turn off the
OTE
firewall and click Update.
For Windows operating system, click Start → Control Panel and start
windows firewall, and set this option unactivated. For other operating
system, refer to its on-line guide.