Replacing the Fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Align the screw holes on the fan with the screw holes on the base frame.
Replace the screws that secure the fan to the base frame.
Route the fan cable through the routing guides on the base frame.
Connect the fan cable to the system board.
Route the display cable through the routing guides on the base frame.
Connect the display cable to the system board.
Adhere the I/O-board cable to the fan.
Slide the I/O-board cable into the I/O-board cable connector and press
down the latch to secure the cable.
Replace the battery.
Computer. After working inside your
After Working Inside Your