Phonic i7300 ReverbMaster User Manual page 14

Tremo
Editable Property Range
Speed
Depth
Phase
Mod Typ
Gate
Editable Property Range
St/Link
L Thrs
L Atck
L Rele
L Hold
L Range
R Thrs
R Atck
R Rele
R Hold
R Range
Compressor
Editable Property Range
St/Link
L Thrs
L Atck
L Rele
L Ratio
R Thrs
R Atck
R Rele
R Ratio
14
Description
0.1 to 10 Hz Determines the frequency of modulation
0 to 100 Allows users to adjust the depth of modulation
0 to 180° Used to adjust the phasing of left and right channels
Sine, Trg or Saw Allows users to select waveform used for low frequecny oscillation
Description
Stereo Link mode allows you to edit both the left and right gates
On or Off
simultaneously
-50 to 0 Determines the threshold of the left gate
0 to 200 Allows you to select the attach rate of the left gate
0.01 to 2.55 Determines the release rate of the left gate
Allows users to define the time that the gate will remain open
0.00 to 2.55
Allows users to define the range of the left gate
-INF, -50 to 0
-50 to 0 Determines the threshold of the right gate
0 to 200 Allows you to select the attach rate of the right gate
0.01 to 2.55 Determines the release rate of the right gate
Allows user to define the time that the gate will remain open
0.00 to 2.55
Allows users to define the range of the right gate
-INF, -50 to 0
Description
Stereo Link mode allows you to edit both the left and right gates
On or Off
simultaneously
-50 to 0 Determines the threshold of the left compressor
0 to 200 Allows you to select the attach rate of the left compressor
0.01 to 2.55 Determines the release rate of the left compressor
Allows you to define the ratio of compression that will be applied
1.0 to 10.0, -INF
-50 to 0 Determines the threshold of the right compressor
0 to 200 Allows you to select the attack rate of the right compressor
0.01 to 2.55 Determines the release rate of the right compressor
Allows you to define the ratio of compression that will be applied
1.0 to 10.0, -INF
i7300