Keep this unit away from heat sources such as radiators, heat registers, stoves, etc. This unit contains no user-serviceable parts. Refer all service needs to a qualified service engineer through a Phonic dealer. This triangle on your component alerts you...
The input level control sets the level going into the They are bi-color LEDs. In most cases, they light up DFX256. You should set the level so that Peak (2) green as “signal” LEDs, and will turn red when the DFX256 is receiving a peak level signal.
This 7-segment display indicates the current ef- fect program in Program mode. POWER SWITCH This switch turns the power of the DFX256 on/off. When EFFECT MODES CHART power is off, the DFX256 will be in signal bypass This chart shows you what 16 effect modes are position automatically i.e.
TWO MONO CORDS IN AND OUT (to a stereo amplifier or two mixer inputs) This can be stereo signal in/out or mono signal in/out. INSTRUMENT OF TO MIXING CONSOLE OR AMPLIFIER EFFECTS SEND DFX 256 USER’S MANUAL PHONIC CORPORATION Page 14...