Page 5
Canada. European Conformity Statement unitech Electronics co., Ltd herewith declares that the unitech product is in compliance with the essential requirements and all other provisions of the R&TTE 1999/5/EC directive, the EMC 2004/108/EC directive and the Low Voltage 2006/95/EC directive.
Page 7
Laser Information The unitech product is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC 825-1. Class II and Class 2 products are not considered to be hazardous. The unitech product contains internally a Visible Laser Diode (VLD) whose emissions do not exceed the maximum limits as set forth in the above regulations.
Page 8
It may not be functional anymore. Please only use the original battery from unitech. Using a third party battery can damage our products. Please note that when such damage occurs, it is not covered by unitech’s warranty policy.
Page 10
Please remove the power adapter when the battery is fully recharged. The bundled power adapter that comes with your unitech product is not meant to be used outdoors. An adapter exposed to water or rain, or a very humid environment can cause damage to both the adapter and the product.
Page 12
Worldwide Support unitech’s professional support team is available to quickly answer questions or assist with technical-related issues. Should an equipment problem occur, please contact the nearest unitech regional service representative. For complete contact information please visit the Web sites listed below: Taipei, Taiwan –...
Page 13
The warranty period is varied from each country. Please consult with your supplier or unitech local office for actual length of warranty period to your purchased product. Warranty becomes void if equipment is modified, improperly installed or used, damaged by accident or neglect, or if any parts are improperly installed or replaced by the user.
PA692A User’s Manual Chapter 1 - Overview 1.1 Package Please make sure the following contents are in the PA692A gift box. If something is missing or damaged, please contact your unitech representative. The standard package contents PA692A Terminal ...
Page 26
PA692A User’s Manual 1.4.5 Using the MicroSD Memory Card The PA692A has an expansion slot compatible with a range of MicroSD memory cards, which are primarily used to back up or transfer files and data. Inserting a Memory Card Remove the two screws on the MicroSD slot shield and remove the shield.
Page 27
PA692A User’s Manual 1.4.6 Using the SIM Card The PA692A has a slot for a GPRS SIM card inside the battery compartment. Inserting the SIM card Remove the battery cover and the main battery. Slide the cover of the SIM card slot to the right to release the latch.
Page 31
Then you can refer to the following table to execute the desired function or input. When the PA692A turns on, the numeric mode is on by default. When you toggle to alpha mode, the CAPS mode is off by default. Use the Alpha key to toggle to CAPS.
Page 48
2.12.2 Programming a key Enable/ Disable wakeup After the key is mapped to a key code, check the Enable wakeup checkbox to wake PA692A by pressing the programmable keys when PA692A is in sleep mode. Note: This function only applies to KEYCODES.
PA692A User’s Manual 3.5 MoboLink MoboLink is a software platform that helps unitech customers to remote manage their purchased devices and applications. The core of the MoboLink platform provides functionalities in the MDM (Mobile Device Management) and MAM (Mobile Application Management) domains, and then further extends into other management functions such as alert notification management and account management.