Terminal Panel - NEC MultiSync LCD4010 User Manual

Parts Name and Functions
AC IN connector
1
Connects with the supplied power cord.
RGB 1 IN (DVI-D)
2
To input digital RGB signals from a computer or HDTV device
having a digital RGB output.
* This connector does not support analog input.
RGB 2 IN (mini D-Sub 15 pin)
3
To input analog RGB signals from a personal computer or other
RGB equipment.
RGB 3
[R, G, B, H, V] (BNC)
4
IN connector: To input the analog RGB signals or signals from
other RGB equipment. A Sync-on-Green signal can be con-
nected to the G connector.
RGB OUT
5
connector (BNC)
To output the signal from the RGB 3 IN connector.
DVD/HD
connector (BNC)
6
Connecting equipment such as a DVD player, HDTV device, or
Laser disc player.
Denotes an AV unit function.
AV
All AV functions are enabled when the AV unit is installed.

Terminal Panel

AV
English-7
–continued
AUDIO IN 1,2,3
7
AV
Input audio signal from external equipment such as a computer,
VCR or DVD player.
AUDIO OUT
8
AV
Output the audio signal from the selected AUDIO IN source.
VIDEO INPUT/OUTPUT CONNECTOR
9
VIDEO IN connector (BNC and RCA): Input a composite video
signal. BNC and RCA are not available at the same time.
(Use only one input).
VIDEO OUT connector (BNC): Output the composite video
signal from the VIDEO IN source.
S-VIDEO IN connector (DIN 4 pin): Input the S-video (Y/C
separate signal). See page 26, S-VIDEO MODE SETTING.
EXTERNAL CONTROL (mini D-Sub 9 pin) RS-232C
10
In connector: Input signal from control equipment such as a
computer or the output from a different MultiSync LCD4010 /
MultiSync LCD4610.
Out connector: To connect multiple MultiSync LCD4010
MultiSync LCD4610
EXTERNAL SPEAKER TERMINAL
11
Outputs the audio signal from the selected audio source.
1-8
AV
/
AV