NEC MultiSync LCD4010 User Manual

NEC MultiSync LCD4010 User Manual

Hide thumbs Also See for MultiSync LCD4010:

Advertisement

User's Manual
A Version
1-1

Advertisement

Table of Contents
loading

Summary of Contents for NEC MultiSync LCD4010

  • Page 1 User's Manual A Version...
  • Page 2: Table Of Contents

    Index Important Information .......................... English-2 Safety Precautions, Maintenance, & Recommended Use ..............English-3 Contents ..............................English-4 Attaching LCD Options ..........................English-5 Parts Name and Functions Control Panel ..........................English-6 Terminal Panel .......................... English-7 Wireless Remote Control ......................English-8 Operating Range for the Remote Control ................English-9 Handling the Remote Control ....................
  • Page 3: Important Information

    Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
  • Page 4: Safety Precautions, Maintenance & Recommended Use

    CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR monitor. CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE • When operating the MultiSync LCD4010 / MultiSync LCD4610 FOLLOWING WHEN YOU POSITION THE MONITOR: monitor with its AC 125-240V power supply, use a power sup- •...
  • Page 5: Contents

    All AV functions are enabled when the AV unit is installed. The following optional components are available to use with the MultiSync LCD4010 / MultiSync LCD4610. To obtain the optional components and additional information, contact Customer Service at (800) 632-4662.
  • Page 6: Attaching Lcd Options

    NEC authorized service person. main power switch cover and turn off the switch, or remove the Failure to follow NEC standard mounting procedures could result in power cord from the AC Inlet at the back of the monitor.
  • Page 7: Parts Name And Functions

    Parts Name and Functions Control Panel EXIT INPUT MUTE Button Location EXIT INPUT MUTE POWER button ( DOWN ( ) button Switches the power on/off. See page 18. Activates the OSM menu when the OSM menu is turned-off. Acts as button to move the highlighted area down to select the MUTE button adjustment with OSM menu.
  • Page 8: Terminal Panel

    RGB OUT connector (BNC) In connector: Input signal from control equipment such as a To output the signal from the RGB 3 IN connector. computer or the output from a different MultiSync LCD4010 / MultiSync LCD4610. DVD/HD connector (BNC) Out connector: To connect multiple MultiSync LCD4010...
  • Page 9: Wireless Remote Control

    Parts Name and Functions –continued Wireless Remote Control VOLUME DOWN button Decrease the audio output level. PIP (Picture In Picture) button ON/OFF button: Toggle switches between PIP,POP, side-by-side (aspect) and side-by-side (full). INPUT button: Select the ‘picture in picture’ input signal. CHANGE button: Replaces to the main picture and sub picture.
  • Page 10: Operating Range For The Remote Control

    Parts Name and Functions –continued Operating Range for the Remote Control Caution Point the top of the remote control toward the LCD monitor's remote The remote control system may not function when direct sunlight or sensor while pressing button. strong illumination strikes the remote control sensor of the LCD moni- Use the remote control within a distance of about 7 m/23 ft.
  • Page 11: Setup Procedure

    6. Operate the attached external equipment CAUTION Display the signal from the desired input source. Incorrect usage of batteries can result in leaks or bursting. NEC recommends the following battery use: • Place "AA" size batteries matching the + and - signs on each 7.
  • Page 12 We recommend using the optional speakers designed for the MultiSync LCD4010 / MultiSync LCD4610. The external speaker terminals of the MultiSync LCD4010 / MultiSync LCD4610 may be connected with the speaker plug of a mainframe sound speaker. It this case, please exchange the lead connector of a mainframe sound speaker for an attached speaker plug.
  • Page 13: Connections

    Connections Before connecting external equipment to LCD: First turn off the power to all of the equipment associated with the LCD as well as that of the equipment to be connected. For questions regarding external equipment please refer to the user’s manual supplied with that equipment. Wiring Diagram Attaching the Ferrite Core Mounting Position of Ferrite Core...
  • Page 14: Connecting The Lcd Monitor To A Pc

    Connections –continued Connecting the LCD Monitor to a PC Connecting your computer to your LCD monitor will enable you to display your computer's screen image. Some video cards may not display an image correctly. • To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the provided RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin).
  • Page 15: Connecting To A Macintosh Computer

    ® computers, use Macintosh cable adapter to connect to your Macintosh's video port. NOTE: To obtain the Macintosh cable adapter call NEC-Mitsubishi Electronics Display of America, Inc. at (800) 632-4662 • To connect the RGB 3 IN connector (BNC) on the LCD monitor, use the signal cable available separately (mini D-sub 15 pin to BNC x 5).
  • Page 16: Connecting To A Computer With A Digital Output

    Connections –continued Connecting to a Computer with a Digital Output Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. • The RGB 1 IN connector also accepts a DVI-D cable. •...
  • Page 17: Connecting To A Dvd Player

    Connections –continued Connecting to a DVD Player Connecting your DVD player to your LCD monitor will enable you to display your DVD video. Refer to your DVD player’s owner’s manual for additional information. • To connect the DVD/HD IN connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will need a BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided).
  • Page 18: Connecting To A Stereo Amplifier

    Connections –continued Connecting to a Stereo Amplifier You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier's owner's manual for additional information. • Turn on the LCD monitor and the amplifier only after all connections have been made. •...
  • Page 19: Basic Operation

    Basic Operation –Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red while powered off. The monitor can be powered on or off using the following three options: 1. Pressing the power button. NOTE: Before pressing the power button, be sure to turn on the Main Power Switch on the LCD monitor.
  • Page 20: Power Indicator

    Basic Operation –continued Power Indicator Picture Mode Power Indicator RGB 1, 2, 3 HIGHBRIGHT STANDARD sRGB Status Power ON Green DVD/HD, VIDEO HIGHBRIGHT STANDARD CINEMA Power OFF Power Standby Red On when “SCHEDULE” is enabled Green Blinking Power Standby Red , Green Information OSM Diagnosis (Detecting failure) Red Blinking...
  • Page 21: Osm (On-Screen-Manager) Controls

    OSM (On-Screen Manager) Controls -Picture Press MENU button to open Press SET button to Press the UP, DOWN, PLUS, or Press MENU or EXIT Main-menu decide MINUS buttons to select options button to exit Press UP or DOWN button and to make adjustments to to select sub-menu settings Press SET button to select...
  • Page 22: Screen

    OSM Controls -Screen PICTURE Adjusts the tint of the screen. BRIGHTNESS TINT CONTRAST SHARPNESS TINT TINT Press + button the flesh tone color becomes greenish. COLOR BLACK LEVEL Press - button the flesh tone color becomes purplish. NOISE REDUCTION *:INPUT DVD/HD,VIDEO + -:ADJ EXIT :RETURN...
  • Page 23: Audio

    OSM Controls -Audio Adjusts the vertical size by increasing or decreasing SCREEN the setting. V RESOLUTION H POSITION V POSITION Press + button to expand the height of the image on CLOCK V RESOLUTION CLOCK PHASE the screen. H RESOLUTION V RESOLUTION Press - button to narrow the height of the image on the ZOOM MODE...
  • Page 24: Configuration 1

    OSM Controls -Configuration Main-Menu MAIN MENU PICTURE PICTURE IN PICTURE SCREEN AUDIO CONFIGURATION 1 CONFIGURATION 2 ADVANCED OPTION :SEL :NEXT EXIT :RETURN MENU :EXIT MENU Sub-Menu PIP SIZE Selects the size of picture inserted in the 'Picture-in- PIP SIZE PIP AUDIO LARGE PIP RESET Picture' (PIP) mode.
  • Page 25 OSM Controls-Configuration2 Select "SCREEN SAVER" settings to reduce the risk of "Image Persistence". GAMMA: The display gamma is changed and fixed when "ON" is selected. COOLING FAN: The built in cooling fan is always on when set to "ON". CONFIGURATION 1 SCREEN SAVER BRIGHTNESS: The brightness is decreased when "ON"...
  • Page 26: Off Timer

    OSM Controls-Configuration2 The OSM control menu will stay on as long as it is in CONFIGURATION 2 OSM TURN OFF LONG CABLE ON/OFF use. In the OSM Turn Off submenu, you can select how LONG CABLE MANUAL OSM TURN OFF OSM TURN OFF long the monitor waits after the last touch of a button to INFORMATION OSM...
  • Page 27: Advanced Option

    OSM Controls -Advanced option Main-Menu MAIN MENU PICTURE SCREEN ADVANCED OPTION AUDIO CONFIGURATION 1 CONFIGURATION 2 ADVANCED OPTION :SEL :NEXT EXIT :RETURN MENU :EXIT MENU Sub-Menu Selects the S-Video input port function. PRIORITY: ADVANCED OPTION If cable is connected to the S-Video input, it will have S-VIDEO MODE S-VIDEO MODE BLACK LEVEL EXPANSION...
  • Page 28: Power On Delay

    OSM Controls -Advanced option Selects the infra-red wireless remote controllers mode with using the RS-232C daisy chain. The item in this menu will become effective by pressing "SET" button on the selected item. NORMAL: The monitor will be controlled normally by wireless remote controller.
  • Page 29: Note

    Please set “SCREEN SAVER”, “DATE & TIME” and “SCHEDULE” functions to further reduce the risk of Image persistence. NOTE 2: MONITOR ID and IR CONTROL Using the one PC or one infra-red wireless controller, you can control up to 26 MultiSync LCD4010 / LCD4610 monitors that are connected in a daisy chain by an RS-232C.
  • Page 30: Using The Lcd With A Personal Computer (Pc)

    * RS-232C OUT terminal can connect to MultiSync LCD4010 / LCD4610 only. Do not connect to other equipment. The following control sequence is used for a single MultiSync LCD4010 / MultiSync LCD4610. To control multiple LCD4010 / MultiSync LCD4610 monitors that are daisy-chained together please use the extended control command. Instructions for the extended control command can be found on the CD included with the display.
  • Page 31 Using the LCD with a Personal Computer –continued 3) Control sequence (1) The command from a personal computer to the LCD monitor will take 400ms. (2) The LCD monitor will send a return command 400ms* after it has received an encode. If the command isn't received correctly, the LCD monitor will not send the return command.
  • Page 32 Using the LCD with a Personal Computer –continued Structure of the Read-command ASCII Function Data (Receive) Function Data (Receive) 76 50 POWER OFF(stand by) 76 50 RGB-1(DVI-D) 76 49 72 31 RGB-2(D-sub) 76 49 72 32 RGB-3(BNC) 76 49 72 33 Input Video 76 49...
  • Page 33: Features

    ) puts you in complete control of display setting adjustments. ® NEC’s quality and reliability provide peace of mind with a 1-year warranty (including backlight) and 24/7 customer service and technical support. Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight reductions.
  • Page 34: Troubleshooting

    NOTE: As with all personal display devices, NEC-Mitsubishi Electronics Display recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
  • Page 35: References

    References NEC-Mitsubishi Monitor Customer Service & Support Customer Service and Technical Support: (800) 632-4662 Fax: (800) 695-3044 Parts and Accessories/ Macintosh Cable Adapter: (888) NEC-MITS [888-632-6487] Warranty Information www.necmitsubishi.com/warranty Online Technical Support www.necmitsubishi.com/support Sales and Product Information Sales Information Line:...
  • Page 36: Specifications

    Specifications - LCD4010 Product Specifications Analog Input Digital Input LCD Module (40" / 101.6 cm diagonal) Pixel Pitch 0.648mm Resolution 1366 x 768 dots Color Over 16 million colors (depending on video card used) Brightness 500cd/m2 (Typ.) Contrast ratio 800 : 1 Viewing Angle Up 85 / Down 85 / Left 85 / Right 85 (typ) @ CR >10 External speaker output inpedance...
  • Page 37: Specifications

    Specifications - LCD4610 Product Specifications Analog Input Digital Input LCD Module (46" / 116.8 cm diagonal) Pixel Pitch 0.7455mm Resolution 1366 x 768 dots Color Over 16 million colors (depending on video card used) Brightness 500cd/m2 (Typ.) Contrast ratio 800 : 1 Viewing Angle Up 85 / Down 85 / Left 85 / Right 85 (typ) @ CR >10 External speaker output inpedance...
  • Page 38: Pin Assignment

    Pin Assignment 1) Analog RGB Input (MiniDsub): R G B 2 2) S-VIDEO input: V I D E O 3) Digital RGB Input (DVI-D): R G B 1 l a i l a i 4) RS-232 input English-37 1-38...
  • Page 39: Limited Warranty

    Limited Warranty NEC-Mitsubishi Electronics Display of America, Inc. (hereinafter “NMD-A”) warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NMD-A’s sole option) any part of the enclosed unit which proves defective for a period of one (1) year from the date of first consumer purchase.
  • Page 40 LCD4610™ (L464G7) is in compliance with Council Directive 73/23/EEC: – EN 60950-1 Council Directive 89/336/EEC: — EN 55022 — EN 61000-3-2 — EN 61000-3-3 — EN 55024 and marked with NEC-Mitsubishi Electric Visual Systems Corporation 4-13-23, Shibaura, Minato-Ku Tokyo 108-0023, Japan English-39 1-40...
  • Page 41: Declaration Of Conformity

    FCC Rules. Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation. All other brands and product names are trademarks or registered trademarks of their respective owners.

This manual is also suitable for:

Multisync lcd4610

Table of Contents