Advertisement

WMB 71032 LM

Washing Machine

User's Manual
Document Number
2820523769 /
02-01-14.(19:43)

Advertisement

Table of Contents
loading

Summary of Contents for Beko WMB 71032 LM

  • Page 1: Washing Machine

    WMB 71032 LM Washing Machine User’s Manual Document Number 2820523769 / 02-01-14.(19:43)
  • Page 2: Important Instructions For Safety And Environment

    1 Important instructions for safety and environment This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.1 General safety • This product can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack expe- rience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out.
  • Page 3: Intended Use

    • Place the product on a rigid, flat and level surface. • Do not place it on a long-pile rug or similar surfaces. • Do not place the product on a high platform or near the edge on a cascaded surface. •...
  • Page 4: Compliance With Weee Directive

    1.6 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its servi- ce life.
  • Page 5: Appropriate Installation Location

    2 Installation 1. Loosen all the bolts with a suitable spanner until they rotate freely (C) . Refer to the nearest Authorised Service Agent for installation 2. Remove transportation safety bolts by turning them of the product. To make the product ready for use, review gently.
  • Page 6: Connecting To The Drain

    3. Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, 1.
  • Page 7: Initial Use

    3 Preparation 3.4 Initial use Before starting to use the product, make sure that all 3.1 Sorting the laundry preparations are made in accordance with the instructions in • Sort laundry according to type of fabric, colour, and sections “Important safety instructions” and “Installation”. degree of soiling and allowable water temperature.
  • Page 8: Loading The Laundry

    • Wash woolens with special detergent made specifically for woolens. 3.6 Loading the laundry 1. Open the loading door. Use only detergents manufactured specifically warning 2. Place laundry items loosely into the machine. for washing machines. 3. Push the loading door to close until you hear a locking sound.
  • Page 9: Using Starch

    • If the gel detergent thickness is not fluidal or in the shape of capsule liquid tablet, put it directly into the drum before washing. • Put tablet detergents into the main wash compartment (compartment nr. "2") or directly into the drum before washing.
  • Page 10: Tips For Efficient Washing

    3.8 Tips for efficient washing Clothes Delicates/ Light colours and whites Colours Dark colours Woolens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature temperature range temperature range range based on soiling level: range based on soiling level: based on soiling level: based on soiling level: 40-90ºC) cold-40ºC) cold-40ºC)
  • Page 11: Control Panel Overview

    4 Operating the product 4.1 Control panel 1 - Programme Selection knob (Uppermost position On / Off) 5 - Start / Pause button 2 - Display 6 - Auxiliary Function buttons 3 - Delayed Start button 7 - Spin Speed Adjustment button 4 - Programme Follow-up indicator 8 - Temperature Adjustment button Dark wash...
  • Page 12: Preparing The Machine

    4.2 Preparing the machine 4.5 Additional programmes Make sure that the hoses are connected tightly. Plug in your For special cases, additional programmes are available in machine. Turn the tap on completely. Place the laundry in the the machine. machine. Add detergent and fabric softener. Additional programmes may differ according to the 4.3 Programme selection model of the machine.
  • Page 13: Special Programmes

    4.6 Special programmes For specific applications, select any of the following programmes. • Rinse Use this programme when you want to rinse or starch separately. • Spin+Drain Use this programme to apply an additional spin cycle for your laundry or to drain the water in the machine. Before selecting this programme, select the desired spin speed and press Start / Pause button.
  • Page 14: Programme And Consumption Table

    4.9 Programme and consumption table Auxiliary functions Selectable temperature Programme range °C Cottons 2.15 1600 • • • • • • Cold-90 Cottons 1.40 1600 • • • • • • Cold-90 Cottons 0.70 1600 • • • • • •...
  • Page 15 ** “Cotton Economic 40°C and Cotton Economic 60°C are standard cycles.” These cycles are known as ‘40°C cotton standard cycle’ and ‘60°C cotton standard cycle’ and indicated with the symbols on the panel. The auxiliary functions in the table may vary according to the model of your machine. Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.
  • Page 16: Auxiliary Function Selection

    4.10 Auxiliary function selection • Rinse Hold If you are not going to unload your clothes immediately after Select the desired auxiliary functions before starting the programme completes, you may use rinse hold function the programme. Furthermore, you may also select or to keep your laundry in the final rinsing water in order to cancel auxiliary functions that are suitable to the running prevent them from getting wrinkled when there is no water...
  • Page 17: Starting The Programme

    4.11 Starting the programme 4.13 Progress of programme Press Start / Pause button to start the programme. Progress of a running programme can be followed from the Programme follow-up light showing the startup of the Programme Follow-up indicator. At the beginning of every programme will turn on.
  • Page 18: Maintenance And Cleaning

    5 Maintenance and cleaning 4.16 Canceling the programme To cancel the programme, turn the Programme Selection Service life of the product extends and frequently faced knob to select another programme. Previous programme problems decrease if cleaned at regular intervals. will be canceled. End / Cancel light will flash continuously to 5.1 Cleaning the detergent drawer notify that the programme has been canceled.
  • Page 19: Cleaning The Loading Door And The Drum

    5.2 Cleaning the loading door and the drum Residues of softener, detergent and dirt may accumulate in your machine in time and may cause unpleasant odours and washing complaints. To avoid this, use the Drum Cleaning programme. If your machine is not featured with Drum Cleaning programme, use Cottons-90 programme and select Additional Water or Extra Rinse auxiliary functions as well.
  • Page 20 You can remove the filter cover by slightly pushing downwards with a thin plastic tipped tool, through the gap above the filter cover. Do not use metal tipped tools to remove the cover. 3. Some of our products have emergency draining hose and some does not have.
  • Page 21: Technical Specifications

    6 Technical specifications Models (EN) WMB 71032 LM Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net weight (±4 kg.) 220-240 V / 50Hz Electrical input (V/Hz) Total current (A) Total power (W) 2000-2350 Spin speed (rpm/ min., max.)
  • Page 22: Troubleshooting

    7 Troubleshooting Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Cancelling the programme") Water in the machine.
  • Page 23: Product Fiche

    PRODUCT FICHE Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Beko Model name WMB 71032 LM Rated capacity (kg) Energy efficiency class Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) 1.001...
  • Page 24 24 / EN Washing Machine / User’s Manual...

Table of Contents