Related Manuals for Beko WMB 71043 LMS
Summary of Contents for Beko WMB 71043 LMS
-
Page 1: Washing Machine
WMB 71043 LMS Washing Machine User’s Manual Document Number 2820523770 / 02-01-14.(21:10) -
Page 2: Important Instructions For Safety And Environment
1 Important instructions for safety and environment This section contains safety instructions that will help protect from risk of perso- nal injury or property damage. Failure to follow these instructions shall void any warranty. 1.1 General safety • This product can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out. -
Page 3: Intended Use
• If the power cable is damaged, it must be replaced by the manufacturer, after sales service or a similarly qualified person (preferably an electrician) or someone designated by the importer in order to avoid possible risks. • Place the product on a rigid, flat and level surface. •... -
Page 4: Disposing Of The Waste Product
1.5 Disposing of the waste product • This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Therefore, do not dispose the pro- duct with normal domestic waste at the end of its service life. Take it to a collec- tion point for the recycling of electrical and electronic equipment. -
Page 5: Connecting Water Supply
2 Installation 1. Loosen all the bolts with a suitable spanner until they rotate freely (C) . Refer to the nearest Authorised Service Agent for installation 2. Remove transportation safety bolts by turning them of the product. To make the product ready for use, review gently. -
Page 6: Connecting To The Drain
3. Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, 1. -
Page 7: Initial Use
3 Preparation 3.4 Initial use Before starting to use the product, make sure that all 3.1 Sorting the laundry preparations are made in accordance with the instructions in • Sort laundry according to type of fabric, colour, and sections “Important safety instructions” and “Installation”. degree of soiling and allowable water temperature. -
Page 8: Using Detergent And Softener
The loading door is locked while a programme is running. Do not use soap powder. The door can only be opened a while after the programme warning comes to an end. Adjusting detergent amount In case of misplacing the laundry, noise and warning The amount of washing detergent to be used depends vibration problems may occur in the machine. - Page 9 Tablet detergents may leave residues in the detergent compartment. If you encounter such a case, place the tablet detergent between the laundry, close to the lower part of the drum in future washings. Use the tablet or gel detergent without selecting the prewash function.
-
Page 10: Tips For Efficient Washing
3.8 Tips for efficient washing Clothes Delicates/ Light colours and whites Colours Dark colours Woolens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature temperature range temperature range range based on soiling level: range based on soiling level: based on soiling level: based on soiling level: 40-90ºC) cold-40ºC) cold-40ºC) -
Page 11: Operating The Product
4 Operating the product 4.1 Control panel 1 - Spin Speed Adjustment button 5 - On / Off button 2 - Display 6 - Delayed Start buttons (+ / -) 3 - Temperature Adjustment button 7 - Auxiliary Function buttons 4 - Programme Selection knob 8 - Start / Pause / Cancel button 11 / EN... -
Page 12: Display Symbols
4.2 Display symbols 4.5 Main programmes Depending on the type of fabric, use the following main programmes. • Cottons Use this programme for your cotton laundry (such as bed sheets, duvet and pillowcase sets, towels, bathrobes, underwear, etc.). Your laundry will be washed with vigorous washing action for a longer washing cycle. -
Page 13: Economy Symbol
• Dark Care 4.8 Temperature selection Use this programme to wash your dark coloured laundry Whenever a new programme is selected, the maximum or the laundry that you do not want it get faded. Washing temperature for the selected programme appears on the is performed with little mechanic action and at low temperature indicator. -
Page 14: Programme And Consumption Table
4.10 Programme and consumption table Auxiliary functions Wybór zakresu Programme (°C) temperatur °C Cottons 2.10 1600 • • • • • • 90-Cold Cottons 1.40 1600 • • • • • • 90-Cold Cottons 0.70 1600 • • • • •... - Page 15 ** “Cotton eco 40°C and Cotton eco 60°C are standard cycles.” These cycles are known as ‘40°C cotton standard cycle’ and ‘60°C cotton standard cycle’ and indicated with the symbols on the panel. The auxiliary functions in the table may vary according to the model of your machine. Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.
-
Page 16: Time Display
4.11 Auxiliary function selection If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause / Cancel button. Select the desired auxiliary functions before starting The programme resumes. Water is drained, laundry is spun the programme. -
Page 17: Progress Of Programme
flashes. Decrease the delayed start time by pressing the Changing the speed and temperature settings for Delayed Start - button. Programme duration appears after auxiliary functions 30 minutes. Press Start / Pause / Cancel button to start the Depending on the step the programme has reached, you programme. -
Page 18: Maintenance And Cleaning
If you only want to drain the water without spinning: functions as well. Run the Before starting the programme, Just press Start / Pause / Cancel button. Pause symbol put max. 100 g of powder anti-limescale into the main disappears. Start symbol appears. Programme resumes and wash detergent compartment (compartment nr. -
Page 19: Draining Remaining Water And Cleaning The Pump Filter
4. Replace the gaskets and filters carefully in their places Discharging the water when the product has an emergency and tighten the hose nuts by hand. draining hose: 5.5 Draining remaining water and cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump impeller during discharge of washing water. -
Page 20: Technical Specifications
6 Technical specifications Models (EN) WMB 71043 LMS Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net weight (±4 kg.) Electrical input (V/Hz) 220-240 V / 50Hz Total current (A) Total power (W) 2000-2350 Spin speed (rpm/ min., max.) -
Page 21: Troubleshooting
7 Troubleshooting Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Cancelling the programme") Water in the machine. -
Page 22: Product Fiche
PRODUCT FICHE Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Beko Model name WMB 71043 LMS Rated capacity (kg) Energy efficiency class Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) 1.001... - Page 23 23 / EN Washing Machine / User’s Manual...
- Page 24 24 / EN Washing Machine / User’s Manual...