Removing And Installing Components; Recommended Tools; Removing The Cover; Installing The Cover - Dell Precision Workstation T1650 Owner's Manual

Removing and Installing Components

This section provides detailed information on how to remove or install the components from your computer.

Recommended Tools

The procedures in this document may require the following tools:
• Small flat-blade screwdriver
• Phillips screwdriver
• Small plastic scribe

Removing the Cover

1. Follow the procedures in
2. Pull up the cover release latch, and lift the cover upwards to remove it from the computer.
Figure 1.

Installing the Cover

1. Place the cover on the computer.
2. Press down on the cover till it clicks into place.
3. Follow the procedures in
Before Working Inside Your Computer .
After Working Inside Your Computer .
2
7