Thermal fuse, Battery PCB
Adhesive:TSE3941
Terminals
#226×3
RED
BLACK
Thermal fuse
Battery case
Soldering
#226×2
Battery PCB
- A11・SB-600 -
・ Attach the battery PCB with 5 screws
(#226) on the battery case.
・ Apply the adhesive (TSE3941) on the
battery case, and fit the thermal fuse as
shown left (by putting the terminals of
the thermal fuse into the holes of the
battery PCB.)
Caution: Using the adhesive other than
TSE3941 may cause malfunction
of the thermal fuse.
Use this adhesive only.
・ Solder the thermal fuse.
Caution: Taking time to solder the thermal
fuse may cause a damage to the
thermal fuse.
Solder it in the shortest possible
time.
FSA03601-R.3629.A