Setup; Intelli-Time Clock - ACU-RITE 1055RX Instruction Manual

Setup: Geographic Region
Select your geographic region according to
the map (pictured right) by pressing the " "
button, located on the back of the unit. The
letters for each corresponding GEO region are
shown on the display screen. Geographic
region must be set in order for Precision
Forecasting to function properly. *The "
icon and geographic region letter are only visible
in GEO set mode. You will automatically exit
GEO set mode if no buttons are pressed for 10
seconds. Enter GEO set mode at any time by
pressing the "GEO " button located on the back of
the display.
Intelli-Time
®
Intelli-Time clock and calendar are pre-programmed to the correct time and
date, and update automatically for Daylight Saving Time. All you need to do is
select your time zone using the "ZONE" button.
Setup: Time, Date, Units & Language
Press the " " button, located on the back of the display unit, to enter SET
MODE. Once in set mode, the preference you are currently setting will blink on
the display.
To adjust the currently selected (flashing) item, press and release the "
" " buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the "
the next preference. The preference set order is as follows:
LANGUAGE (English, Spanish or French)
TIME ZONE ( PST MST CST EST AST HAST AKST)
AUTO DST (Daylight Saving Time ON or OFF)*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
UNITS: TEMPERATURE (ºF or ºC)
UNITS: WIND SPEED (MPH, KPH or Knots)
UNITS: RAINFALL (in. or mm)
UNITS: PRESSURE (inHg or hPa)
SENSOR: (5-in-1 or 3-in-1)
Clock
A
"
E
" button again to adjust
6
B
C
D
G
F
" or