Ordering Accessories - Philips NT9141 User Manual

ENGLISH
8
Cleaning
Clean the appliance immediately after use and when a lot of hair or dirt
has accumulated on the cutting elements.
Never use compressed air, scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the appliance.
Do not tap on the cutting element.
Do not use any sharp objects to clean the cutting element.
1 Switch off the appliance.
2 To detach the precision trimming head turn it anticlockwise until the
locking indicator points to the 'unlocked' indication (black upward
arrowhead). Then pull the precision trimming head off the handle.
3 Rinse the precision trimming head and the precision trimming comb
with lukewarm water.
4 Let all parts dry completely before you use the appliance again.

Ordering accessories

If the comb is damaged or worn, always replace it with original Philips
comb. If the cutting element of the precision trimming head is damaged or
worn, replace it.
To buy accessories or spare parts, visit www.shop.philips.com/service or go
to your Philips dealer. You can also contact the Philips Consumer Care Centre
in your country (see the worldwide guarantee leaflet for contact details).
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
- Batteries contain substances that may pollute the environment. Remove
the battery when it is empty or when you discard the appliance. Do
not throw away the battery with the normal household waste, but
hand it in at an official collection point.