Important Safety Information - The GigRig Pro 14 Manual

The gigrig pro 14 dynamic audio switcher/guitar
Table of Contents

Advertisement

The GigRig ltd Jan 2009
©

14. Important Safety information

TheGigRig pro-14 is a low voltage device and so it is completely
electrically safe; however, this is not true for some older guitar
amplifiers.
Do not use old two pin mains plug amplifiers.
Your amplifiers must have an earth connection! If you intend to use a
vintage amplifier with a two-pin mains plug
DON'T.
Take your amp to be
serviced by a qualified technician. In most cases a new 3-wire mains lead
can be fitted for just a few pennies. Products now exist to safely solve
hum problems associated with your amps. See our website.
Amplifiers fitted with a ground switch.
Under no circumstances should the GigRig be used with this type of
amplifier.
Some vintage amplifiers where fitted with a Ground switch to break
earth loops and reduce hum. This switch is now commonly known as the
DEATH switch. If your amplifier has such a switch, GET IT SERVICED
NOW!
A very good site for further information about old amplifiers is:
http://www.hsga.org/learningarchive/ampsafety.html
Do not use your Pro-14 in wet conditions. If it accidentally gets wet, it
should be left in a warm dry place for 24 hours before it is used or
stored.
15. Thanks.
Many thanks for purchasing TheGigRig Pro-14; we take our commitment to
you and your sound very seriously. Please keep up to date with all the
latest information on our web site, www.thegigrig.com
You may be surprised how inventive other users can be with TheGigRig
and you may find sharing your ideas a great deal of fun.
These instructions may change without notice. Consult our web site for
updates.
All rights reserved. Design rights claimed. Moral rights asserted. © May 2008
Page 22

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for The GigRig Pro 14

This manual is also suitable for:

Midi 14

Table of Contents