Foot Switch Resting Mode; Mixer Mode (Bypass Off); Mixer Mode (Bypass On) - The GigRig Pro 14 Manual

The GigRig ltd Jan 2009
©

Foot Switch Resting Mode.

Some Guitarists like to rest there foot on the switches whilst playing. To
prevent the GigRig from entering Special Function Mode, whilst resting a
foot on a switch, hold down Foot switch 1 or 8 whilst powering on the
GigRig. The special functions will be defeated on the chosen rail. You can
hold down both 1 and 8 together at power up to defeat all special
functions.
Powering the GigRig in the normal manner will return the GigRig to normal
functionality with Special functions activated.

Mixer Mode (bypass off)

Access mixing mode by holding down the bypass switch when powering up
your GigRig, then switch the top mode switch to mode2.
Mixing mode changes the function of your GigRig. The top bank will now
work independently to the bottom bank. You can use the bottom bank as a
seven effects GigRig and the top bank, in mode 2, as an effects mixer.
The bypass switch will no longer switch off the top bank; so, now when
you add echo, it will stay added. The bypass switch will only clear your
patches on the bottom bank. Try setting your favourite sounds on the
bottom bank and then set the top bank so that each patch switches in one
single effect. This is fantastic for experimentation.
Powering the GigRig in the normal manner will return normal functionality.

Mixer Mode (bypass on)

You can use a shorted audio jack in any EXT input to save holding down
bypass each time you power on, This, sets the GigRig as above; however,
the Bypass will now clears all the Presets and connect your guitar to your
amps.
All rights reserved. Design rights claimed. Moral rights asserted. © May 2008 Page 16