Samsung DCS Compact User Manual page 28

not have this button may dial the access code and the group desired. A station user is
allowed to be in several groups, providing a key and the extender of that group are
assigned for each group on the user's phone.
INCOMING CALL DISTRIBUTION
Incoming calls can be assigned to ring a distributed station hunt group. This will allow
all members of the group to share the call load.
INCOMING/OUTGOING SERVICE
Outside lines are available for incoming or outgoing service. Programming allows any
outside line to be used for incoming calls only, outgoing calls only or both-way service.
INDIVIDUAL LINE CONTROL
Each station in the system can be individually programmed to allow or deny dialing out
as well as allow or deny answering for each outside line.
LEAST COST ROUTING
Least Cost Routing (LCR) is the ability to automatically select the appropriate trunk
group for the number dialed by any station. LCR can become quite complicated to
understand and program but does allow highly complex dialing decisions. The DCS
COMPACT's LCR package includes the following features:
Option to use or not use LCR
l
Programmable LCR access code
l
Digit analysis table—ten digits each with 500 entries
l
Routing by time of day
l
Routing according to individual station class
l
Modify digits table—100 entries
l
Flexible trunk group advance timer
l
Option to use or not use trunk group advance warning tones
l
LIVE SYSTEM PROGRAMMING
The system can be programmed from any display keyset without interrupting normal
system operation. There are three levels of programming: TECHNICIAN, CUSTOMER
and STATION. The technician level has access to all programs and can allow the
customer access to system programs as needed. Technician and customer access
are controlled by different security passcodes.
MEET ME PAGE AND ANSWER
After a user makes a Meet Me Page, the user may remain off-hook to allow the paged
party to meet the user for a private conversation.
4.1.12
CONTENTS