Troubleshooting - C.E.C. TL3N Owner's Manual

Belt drive cd transport
Table of Contents

Advertisement

CD TRANSPORT TL3N

Troubleshooting


If you suspect a malfunction in the unit, please check the following chart
before calling your dealer.
● No power
Check the connection at the both ends of the AC power cord.
Make sure there is power at the wall outlet.
Turning the power on/off repeatedly may cause this. Wait for 5
seconds before turning the power on again.
● No playback
Check that the disc is placed with its label facing up.
Check that the CD door is closed completely.
If the disc is soiled, clean the surface of the disc.
● No sound
Check the connection to the D/A converter.
Check the position of the input selector on the amplifier.
● Sound skipping
Place the player on a stable rack to prevent the effects of vibration.
If the disc is soiled, clean the surface of the disc.
Do not use scratched, damaged or warped discs.
● Interference on the tuner
The tuner is too close to the TL3N. Install the TL3N away from it or
turn off the tuner's power.
● Unresponsive to remote control
Point the remote control towards the remote sensor on the front
panel.
Remove any objects blocking the sensor.
Use the remote control unit at a shorter distance from the TL3N.
Replace the batteries in the remote control unit with new ones.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents