For your protection, please read these
instructions completely, and keep this
manual for future reference.
Carefully observe and comply with all
warnings, cautions and instructions placed
on the set, or described in the operating
instructions or service manual.
To guard against injury, the following basic
safety precautions should be observed in the
installation, use, and servicing of the set.
Power Sources — This set should
be operated only from the type of
power source indicated on the
If you are not sure of the type of
electrical power supplied to your
home, consult your dealer or local
power company. For those sets
designed to operate from battery
power, refer to the operating
Grounding or Polarization — This set is equipped with a
polarized AC power cord plug (a plug having one blade
wider than the other), or with a three-wire grounding type
plug (a plug having a third pin for grounding).
Follow the instructions below:
Overloading — Do not overload
wall outlets, extension cords or
convenience receptacles beyond
their capacity, since this can result
in fire or electric shock.
Always turn the set off when it is
not to be used. When the set is left
unattended and unused for long
periods of time, unplug it from the
wall outlet as a precaution against
the possibility of an internal
malfunction that could create a fire
Object and Liquid Entry — Never
push objects of any kind into the
set through the cabinet slots as they
may touch dangerous voltage
points or short out parts that could
result in a fire or electric shock.
Never spill liquid of any kind on
Attachments — Do not use
attachments not recommended by
the manufacturer, as they may
Cleaning — Unplug the set from
the wall outlet before cleaning or
polishing it. Do not use liquid
cleaners or aerosol cleaners. Use a
cloth lightly dampened with water
for cleaning the exterior of the set.
If a snapping or popping sound
from a projection TV set is
continuous or frequent while the
projection TV is operating, unplug
the projection TV and consult your
dealer or service technician. It is
normal for some projection TV sets
to make occasional snapping or
popping sounds, particularly when
being turned on or off.