Using Your New Projection TV (continued)
Using the White Labeled Buttons for Projection TV Operations
Press to alternate or jump back and forth between two channels. The
projection TV will jump between the current channel and the last channel
selected using the 0-9 buttons.
This is useful when you need to copy down information that appears on the
Press to freeze the desired picture. The frozen picture is displayed in the
window picture while viewing the normal picture of the current channel in the
To change the location of the window picture, press V, v, B or b.
Press FREEZE again to display the normal picture.
Press to display the channel number, current time, channel caption (if set),
and bilingual mode. Bilingual mode indication disappears and the other
indications dim three seconds later.
To turn the display off, press DISPLAY again.
Press repeatedly to scroll through available displays:
XDS (Extended Data Service)
Displays a network name, program name, program type, program length,
program description, call letters and time of the show if the broadcaster
offers this service.
Displayed on the screen if the broadcaster offers this service. (see "Caption
Vision" on page 31)
"Off" appears and the display is canceled.
R e c i i p e
f l o u r - - - - 2
s u g a r - - - 1/2
s a l t - - - - - 1/2
b u t t e r - - - 1
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART