Download  Print this page

Brother Sewing Machine Operation Manual Page 205

Computerized embroidery and sewing machine.
Hide thumbs


— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Error Message
Probable Cause
The "Start/Stop" button or "Reverse/Reinforcement Stitch" button was
pressed when no pattern is selected.
Bobbin thread has run out.
Little bobbin thread remains.
When the embroidery unit is attached.
You tried to set a number of characters that will not fit within the frame.
The upper thread has become tangled around the bobbin case, and the
needle is bent and hitting the needle plate, etc., so the sewing machine
stops (refer to page 186).
You tried a function that cannot be used when the embroidery unit is
A card that cannot be used with this product has been inserted, and you
tried to select a pattern from the card.
An embroidery pattern incompatible with this machine was selected.
The utility stitch or character stitch key was pressed while the
embroidery unit is attached.
You try to retrieve a pattern downloaded as one for a different machine.
The machine is in embroidery mode and the combined character
pattern is too large for the embroidery frame. You can rotate the pattern
90 degrees and continue combining characters.
The "Start/Stop" button, the embroidery key, or the memory key is
pressed in embroidery mode, but the embroidery unit is not attached.
The bobbin winder is winding the bobbin.
If error message "F01" through "F07" appears in the LCD while the
sewing machine is being used, the machine may be malfunctioning.
Contact your nearest authorized service center.
Troubleshooting 203


Table of Contents

   Also See for Brother Sewing Machine

   Related Manuals for Brother Sewing Machine

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: