Download  Print this page

Care And Maintenance; Restrictions On Oiling; Precautions On Storing The Machine; Cleaning The Machine Surface - Brother Sewing Machine Operation Manual

Computerized embroidery and sewing machine.
Hide thumbs

Advertisement

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
APPENDIX

Care and Maintenance

Simple sewing machine maintenance operations are described below.

Restrictions on oiling

In order to prevent damaging this machine, it must
not be oiled by the user.
This machine was manufactured with the necessary
amount of oil applied to ensure correct operation,
making periodic oiling unnecessary.
If problems occur, such as difficulty turning the
handwheel or an unusual noise, immediately stop
using the machine, and contact you authorized
dealer or the nearest authorized service center.
Precautions on storing the
machine
Do not store the machine in any of the locations
described below, otherwise damage to the machine
may result, for example, rust caused by
condensation.
• Exposed to extremely high temperatures
• Exposed to extremely low temperatures
• Exposed to extreme temperature changes
• Exposed to high humidity or steam
• Near a flame, heater or air conditioner
• Outdoor or exposed to direct sunlight
• Exposed to extremely dusty or oily environments
Note
In order to extend the life of this machine,
periodically turn it on and use it.
Storing this machine for an extended period
of time without using it may reduce its
efficiency.

Cleaning the machine surface

If the surface of the machine is dirty, lightly soak a
cloth in neutral detergent, squeeze it out firmly, and
then wipe the surface of the machine. After cleaning
it once with a damp cloth, wipe it again with a dry
cloth.
184
CAUTION
● Unplug the power cord before cleaning
the machine, otherwise injuries or an
electric shock may occur.

Cleaning the race

Sewing performance will suffer if dust collects in the
bobbin case, therefore, it should be cleaned
periodically.
a
Turn off the sewing machine.
b
Unplug the power cord from the power supply
jack on the right side of the sewing machine.
CAUTION
● Unplug the power cord before cleaning
the machine, otherwise injuries or an
electric shock may occur.
c
Remove the flat bed attachment or the
embroidery unit if either is attached.
Grasp both sides of the needle plate cover, and
d
then slide it toward you.
a Needle plate cover
The needle plate cover is removed.
a

Advertisement

Table of Contents

   Also See for Brother Sewing Machine

   Related Manuals for Brother Sewing Machine

This manual is also suitable for:

Nv1250d

Comments to this Manuals

Symbols: 0
Latest comments: